Pegasus Power Supply 12V/10A for PPB 2.1 mm
Pegasus Power Supply 12V/10A for PPB 2.1 m
Carrier | Description | Estimated Delivery | ||
---|---|---|---|---|
Home delivery - International | Home delivery - International |
Thursday, 12 December - Thursday, 19 December |
Home delivery - International
Home delivery - International
Estimated delivery:
Thursday, 12 December - Thursday, 19 December
Pegasus Power Supply 12V/10A for PPB 2,1 mm
Pegasus 12V / 10A - 120W 2,1 mm power supply for Pocket Powerbox and any other Pegasus product. Our Pegasus Astro sealed and certified switching power supply is the perfect match for our products Pegasus Astro. It can provide 12V and up to 10 Amps (120W total power). The low ripple and noise assure you that it will provide the required and correct "power flow" to your equipment. Supplied with a power cable (1.8 m). Cable with Ø 2.5 mm terminal (for Ultimate Powerbox). Regulated output with low ripple noise. Sealed / protected enclosure (moisture / dust cannot enter). Safety agency requirements and EMI / EMS certification. Efficiency level (ErP): VI. CE and FCC certification acquired. Dimensions: 169 x 61 x 39 [mm]. Protections. Over current / short circuit protection: The Pegasus 12V power supply will self-protect any output to ground and automatic recovery when abnormal faults are removed from the circuit. An output short circuit is defined as any output impedance less than 0.1 ohms. Overvoltage: The power supply will automatically recover when faults are removed. Input protection: F1: 6.3 A 250 V Fuse The power supply shall be protected against power line surges and any abnormal conditions. No-load protection The power supply is provided without load operation to prevent damage to the power supply and the system. Protection Class I, (ITU-T K.21 Surge 6KV on request)