Wave 100i Sky-Watcher Sky-Watcher harmonic mount with carbon tripod

Wave 100i Sky-Watcher Harmonic Mount

Features of the Skywatcher Wave 100i Harmonic Mount

The Sky-Watcher 100i mount follows the warp wave design model, commonly known as harmonic.

The Wave 100i weighs only 4.3 kg, but can support a native load capacity of 10 kg and 15 kg, without and with counterweight respectively.

Transmission ratio of 300:1.

Maximum slew rate of 2400x (10° per second).

The Sky-Watcher Wave 100i has a working latitude range of 0° to 90°.

Compatible with sidereal, lunar and solar tracking.

12 V DC power supply.

Comes with a dual mount Vixen and Losmandy.

Compatible in dual AZ/EQ mode.

Advantages of harmonic designs

The Sky-Watcher 100i is based on the voltage wave design, commonly known as harmonic. This type of mount mechanics comes with a number of advantages for astrophotography, including very accurate precision tracking that is pertinent for longer exposure imaging, low backlash and smooth motion for stable tracking, compact designs for ease of transport, and a relatively high payload-to-weight ratio to accommodate a much wider range of equipment.

10 kg payload capacity

The Sky-Watcher Wave 100i weighs only 4.3 kg but can support a native payload capacity of 10 kg without counterweights, but up to 15 kg with a counterweight.

The 300:1 gear ratio ensures smooth turning and tracking

The Wave 100i has a 300:1 gear ratio, which represents a relatively high level of tracking and turning accuracy, as torque and rotation are split into smaller increments, lessening the impact of jolts between rotations that might be evident the longer the exposures. The 100i's maximum slew rate is 2400x (10° per second).

Works at any latitude

The Sky-Watcher Wave 100i has a working latitude range of 0° to 90°, which means it can be successfully operated at any latitude and does not suffer from the limitations of more traditional gear mounts with counterweight obstruction and out-of-range zenith.

Supports multiple tracking

The Wave 100i supports sidereal, lunar and solar tracking. This means it can be reliably used for nighttime astrophotography, lunar capture and stunning solar imaging.

TECHNICAL SPECIFICATIONS SKYWATCHER WAVE 100i SKYWATCHER MOUNT:

• Mount type: equatorial / azimuthal mount
• Load capacity: 10 kg without counterweights - 15 kg with optional counterweights
• Latitude Adjustment Range: 0 to 90
• Type of dovetail: Compatible with Losmandy and Vixen
• Initialization position: Mechanical stop
• Drive: Elliptical gearboxes + synchronous belts (gear ratio 300:1)
• Drive Ar: Stepper motor with elliptical gear unit + synchronous belt + brake
• Dec drive: Stepper motor with elliptical reducer + synchronous belt + brake
• Maximum travel speed: 7.5 degrees/second
• Power supply: 12V-2A (DC5.5-2.1 plug)
• Consumption: 12V/0.4A (off), 12V/1.8A (Goto on)
• Communication interface: Bluetooth / Wi-Fi
• Port: USB-B / USB-A
• Guidance: ST4 port
• Safety: Brake protection in case of accidental shutdown
• Weight: 4.3 kg
• Dimensions: 128,4 x 171 x 235,5mm
• Operating conditions: -10°C to +50°C (-10°F to +50°F)

what is included in the box?

1x Sky-Watcher Wave 100i mount

1x Hard carrying case

1x Spirit level (LED light)

1x Cigarette lighter cable

1x Carbon fiber tripod

Carbon tripod for SkyWatcher Wave mounts

Complete your kit with the carbon fiber tripod for Wave 100i/150i Strainwave mounts

Specifications:

• 3/8" connection screw
• Compatible with Sky-Watcher Wave-100i and Wave-150i mounts directly or using extension tube 20986
• Also compatible with Star Adventurer 2i, Star Adventurer GTi, AZ-GTi and AZ-GTiX when used with the 20991 extension tube
• Leg Main Material: Carbon Fiber
• Height fully extended: 747mm
• Height fully retracted: 500mm
• Weight: 2400g
• Load capacity: 20kg
• Outer diameter of tripod legs: 40mm/35mm

Carbon tripod for SkyWatcher Wave mounts

Wave 100i Sky-Watcher Harmonic Mount