Deliver it 8/15 days
Controller TS DEW NOT 2
Dew-Not controller for up to four spray heaters - 2 separate channels
Carrier | Description | Estimated Delivery | ||
---|---|---|---|---|
Home delivery - International | Home delivery - International |
Friday, 3 January - Friday, 10 January |
Home delivery - International
Home delivery - International
Estimated delivery:
Friday, 3 January - Friday, 10 January
Dew-Not controller for up to four spray heaters - 2 separate channels.
The DNController2 controller is a dual channel controller based on PWM (pulse width modulation) technology. Each channel controls two outputs for a total of four outputs.
This controller is manufactured to operate on 12 volts DC and should never be operated on any other voltage. The total amperage rating for the four outputs is 6 amps. The controller is supplied with a cable fitted with a car cigarette lighter end. A6 amp fuse is provided in the plug .
The Dew Not controller fits Dew Not and Kendrick heating systems, but can also work with other heaters with RCA plugs and 12V nominal voltage.
Technical Specifications:
-
-
-
-
- Microprocessor based dual channel controller
- UL 94V0 enclosure
- RCA jack connectors
- Zero to 100% output control per channel
- Two outputs per channel (can be increased using DNS splitter, sold separately)
- 6 amp capacity
- 6-amp fused 6-amp power cord, 6.8-meter power cable
- Operating voltage is 12 volts.
- Two-stage low battery indicator
- If voltage drops to 11 volts, the power led begins to flash slowly as a low voltage warning.
- If the battery voltage drops to 10.5 volts, the power LED starts flashing rapidly and the outputs turn off. When the voltage recovers to above 12 volts, it will start to operate again.
- The 10.5 volt threshold is useful to avoid permanent damage to the battery packs.
-
-
-
Dew-Not controller for up to four spray heaters - 2 separate channels.