Lunático Seletek Limpet Controller with WIFI and USB connection

Seletek Limpet Lunatic Controller with WIFI and USB connection

Seletek Limpet, the smallest and newest controller in the family.

The prestigious Lunático brand surprises us with the new Seletek Limpet controller (the limpet) with which you can easily control the focuser of your telescope from your cell phone, through the web browser of your computer or from any astronomy program (the corresponding ASCOM and INDILib drivers are available).

Focuser and more..

In addition to focusing, you can control a camera rotator (with our software for Windows and ASCOM), all via USB or wirelessly.

Product description:

With the Limpet you can:

• Control a focuser
• Control a rotator, such as the VSI "Zerotator" or the VSI "TAKometer" Astrodon
• Independent control of any pin of the controller, manual or automatic (depending on the delta temperature), useful not only for fan control but also for heater bands like those of the ZeroDew system.

Connect via Wifi, using the Limpet's internal access point or that of your observatory, or with a USB cable.

The Limpet can be equipped with an optional WIFI antenna. It is only necessary if the WIFI signal is weak. If the access point is in the observatory, it is not necessary. You can also add an optional external temperature sensor.

The Limpet includes the power cable, with locking screw and a screw with thread compatible with photographic tripods. With a very small size and a central hole, it is easily mounted on the telescope with a single screw.

Technical Specifications

• Small body dimensions (70x70x26mm)
• Weight
• Central hole to easily attach the Limpet to the telescope with a single screw.
• External 12V DC power supply (13.8V supplied by some batteries are valid)
• Very low power requirements (30 mA idle connected to wifi, 530 mA focusing with our standard motor)
• Standard 5.5 / 2.1 mm connector, center positive, 12V DC (13.8V supplied by some batteries are valid), with locking screw for secure connection
• Outputs: 4 digital power outputs (up to 1.5A) with automatic shutdown of the controllers in case of overheating.
• Inputs: 3 analog-digital inputs (1 for external temperature sensor, 2 for other uses, protected with resettable fuses)
• Connection to PC via USB and Wifi
• Focuser, rotator and filter wheel software are ASCOM compatible. Linux / INDIlib driver for focuser also available.
• ASCOM and INDiLib compatibility allows focusing from your cell phone via web interface (NEW!)
• Windows software is compatible with any current version (XP, Vista, 7, 10, 32 bit, 64 bit)
• Works with FocusMax, MaximDL, CCDCommander, ACP, CCD AutoPilot, SGPro, Voyager, APT ... and any ASCOM compatible astronomy software.
• All proven Seletek Armadillo and Platyus software is valid for the Limpet (one device at a time).

Accessories available for the Limpet:

• External temperature sensor
• External wifi antenna (only necessary in cases of weak wifi signal). If the wifi access point is in the observatory the antenna is not necessary.
• Power cable with car cigarette lighter adapter
• USB cable

NOTE: You can purchase this controller loose to control the focusing motor you already have, or the complete set (Seletek Limpet autofocuser set), which includes:

• LIMPET controller
• Stepper motor
• Customized coupling
• Motor connection cable

And very soon, you will also have...

• Optional limit switches
• ASCOM Alpaca included

Seletek Limpet lunatic controller with WIFI and USB connection